 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MET540,541AFK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MET540AFK,TC7MET541AFK Octal Bus Buffer TC7MET540AFK Inverted, 3-State Outputs TC7MET541AFK Non-Inverted, 3-State Outputs The TC7MET540AFK and 541AFK are advanced high speed CMOS octal bus buffers fabricated with silicon gate C2MOS technology. They achieve the high speed operation similar to equivalent bipolar schottky TTL while maintaining the CMOS low power dissipation. The TC7MET540AFK is an inverting type and, the TC7MET541AFK is a non-inverting type. When either G1 or G2 are high , the terminal outputs are in the high-impedance state. Weight: 0.03 g (typ.) The input voltage are compatible with TTL output voltage. These devices may be used as a level converter for interfacing 3.3 V to 5 V system. Input protection and output circuit ensure that 0 to 5.5 V can be applied to the input and output (Note) pins without regard to the supply voltage. These structure prevents device destruction due to mismatched supply and input/output voltages such as battery back up, hot board insertion, etc. Note: VCC = 0 V Features * * * * * * * High speed: tpd = 5.4 ns (typ.) (VCC = 5 V) Low power dissipation: ICC = 4 A (max) (Ta = 25C) Compatible with TTL outputs: VIL = 0.8 V (max) VIH = 2.0 V (min) Power down protection is provided on all inputs and outputs. Balanced propagation delays: tpLH tpHL Low noise: VOLP = 1.5 V (max) Pin and function compatible with the 74 series (74AC/HC/F/ALS/LS etc.) 540/541 type. 1 2007-10-19 TC7MET540,541AFK Pin Assignment (top view) TC7MET540AFK G1 A1 A2 A3 A4 A5 A6 A7 A8 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 VCC G1 A1 A2 A3 A4 A5 A6 A7 A8 1 2 3 4 5 6 7 8 9 TC7MET541AFK 20 19 18 17 16 15 14 13 12 11 VCC G2 Y1 Y2 Y3 Y4 G2 Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Y5 Y6 Y7 GND 10 Y8 GND 10 IEC Logic Symbol TC7MET540AFK G1 G2 TC7MET541AFK G1 G2 (1) (19) & EN (1) (19) & EN A1 A2 A3 A4 A5 A6 A7 A8 (2) (3) (4) (5) (6) (7) (8) (9) (18) (17) (16) (15) (14) (13) (12) (11) Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 A1 A2 A3 A4 A5 A6 A7 A8 (2) (3) (4) (5) (6) (7) (8) (9) (18) (17) (16) (15) (14) (13) (12) (11) Y1 Y2 Y3 Y4 Y5 Y6 Y7 Y8 Truth Table Inputs Outputs An X X H L Yn Z Z H L G1 H X L L G2 X H L L Yn Z Z L H X: Don't care Z: High impedance Yn: TC7MET541AFK Y n : TC7MET540AFK 2 2007-10-19 TC7MET540,541AFK Absolute Maximum Ratings (Note 1) Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current DC VCC/ground current Power dissipation Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT ICC PD Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~7.0 Unit V V (Note 2) V mA (Note 4) mA mA mA mW C -0.5~VCC + 0.5 (Note 3) -20 20 25 75 180 -65~150 Note 1: Exceeding any of the absolute maximum ratings, even briefly, lead to deterioration in IC performance or even destruction. Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings and the operating ranges. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/"Derating Concept and Methods") and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Note 2: Output in off-state Note 3: High or low state. IOUT absolute maximum rating must be observed. Note 4: VOUT < GND, VOUT > VCC Operating Ranges (Note 1) Characteristics Supply voltage Input voltage Output voltage Operating temperature Input rise and fall time Symbol VCC VIN VOUT Topr dt/dv Rating 4.5~5.5 0~5.5 0~5.5 0~VCC -40~85 Unit V V (Note 2) (Note 3) V C ns/V 0~20 Note 1: The operating ranges must be maintained to ensure the normal operation of the device. Unused inputs must be tied to either VCC or GND. Note 2: Output in off-state Note 3: High or low state 3 2007-10-19 TC7MET540,541AFK Electrical Characteristics DC Characteristics Characteristics High level low level High level Output voltage low level VOL Symbol VIH VIL VOH Test Condition Ta = 25C VCC (V) 4.5~5.5 4.5~5.5 4.5 4.5 4.5 4.5 5.5 0~5.5 5.5 5.5 0 Min 2.0 Ta = -40~85C Max Typ. Min 2.0 Max Unit Input voltage 0.8 0.8 V VIN = VIH IOH = -50 A or VIL IOH = -8 mA VIN = VIH IOL = 50 A or VIL IOL = 8 mA VIN = VIH or VIL VOUT = VCC or GND VIN = 5.5 V or GND VIN = VCC or GND Per input: VIN = 3.4 V Other input: VCC or GND VOUT = 5.5 V 4.4 3.94 4.5 4.4 3.80 0 0.1 0.36 0.25 0.1 0.1 0.44 2.50 1.0 V 3-state output off-state current Input leakage current IOZ IIN ICC A A A 4.0 1.35 0.5 40.0 1.50 5.0 Quiescent supply current ICCT IOPD mA A Output leakage current AC Electrical Characteristics (Input: tr = tf = 3 ns) Characteristics Propagation delay time (TC7MET540AFK) Propagation delay time (TC7MET541AFK) 3-state output enable time Symbol tpLH tpHL tpLH tpHL tpZL tpZH tpLZ tpHZ tosLH tosHL CIN COUT CPD Test Condition Ta = 25C VCC (V) CL (pF) 5.0 0.5 15 50 15 50 15 50 50 Min Ta = -40~85C Max 7.4 8.4 6.9 7.9 11.3 12.3 11.9 Min 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Max 8.5 9.5 8.0 9.0 13.0 14.0 13.5 Typ. 5.4 5.9 5.0 5.5 8.3 8.8 9.4 Unit ns 5.0 0.5 ns RL = 1 k 5.0 0.5 ns 3-state output disable time RL = 1 k 5.0 0.5 ns Output to output skew Input capacitance Output capacitance Power dissipation capacitance (Note 1) 5.0 0.5 50 1.0 10 1.0 10 ns pF pF pF 4 9 19 (Note 2) Note 1: Parameter guaranteed by design. tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn| Note 2: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption without load. Average operating current can be obtained by the equation: ICC (opr) = CPDVCCfIN + ICC/8 (per bit) 4 2007-10-19 TC7MET540,541AFK Noise Characteristics (Input: tr = tf = 3 ns) Characteristics Quiet output maximum dynamic Quiet output minimum dynamic VOL VOL VIH VIL Symbol VOLP VOLV VIHD VILD Test Condition CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF Ta = 25C VCC (V) 5.0 5.0 5.0 5.0 Typ. 1.1 -1.1 Limit 1.5 -1.5 Unit V V V V Minimum high level dynamic input voltage Maximum low level dynamic input voltage 2.0 0.8 5 2007-10-19 TC7MET540,541AFK Package Dimensions Weight: 0.03 g (typ.) 6 2007-10-19 TC7MET540,541AFK RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 20070701-EN GENERAL * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 7 2007-10-19 |
Price & Availability of TC7MET540AFK07
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |